Mobile Mechanical Dewatering Plant
Our modular High Speed Dewatering Plants can be mobilized to your site easily over common roadways. Our setup, requiring a crane, takes less than a day. The plant’s two Decanter Centrifuges are each driven by 200hp drives controlled by VFD (Variable Frequency Drives) and two 75hp automatic back drives which maximize cake dryness and production. Typically, a 0.5% to 12% solids input is reduced to 10% to 55% solids output by weight. Productivity of 40 to 150 DMT (Dry Metric Tons per day) has been attained in paper and mine sludge. The power requirements are usually supplied by the customer however a generator can be supplied to make the plant completely self-sufficient. Sludge sediment can be pumped directly to our plant from the client’s existing system or a floating pump system, such as a mud cat, can be used to efficiently clean up problem lagoons. We can even dredge out a certain layer of sludge from the bottom of a lagoon, to be dewatered, leaving other layers unaffected.
Centrifuges (2) 30" x 96" bowl Motors 200 hp Main Drive 75 hp Back Drive Weight 24,500 lbs/11,200 kg Sludge Flows up to 580 USGPM/2,200 l/min Inlet 0.5% to 12% solids Outlet 10% to 55% Solids Sludge Tank Length 46 ft./14 m Width 10 ft./3 m Height 10 ft./3 m Weight 22,000 lbs/10,000 kg Capacity 22,000 gal/100,000 l Polymer Container Length 24 ft./7.3 m Width 8 ft./2.5 m Height 3 ft./2.5 m Weight 14,500 lbs/6,600 kg Capacity 2 x 2,200 gal/2 x 10,000 l Electrical Container Length 20 ft./9.1 m Width 8 ft./2.5 m Height 8 ft./2.5 m Weight 10,000 lbs/4,500 kg Electrical Requirements approximately 350 kW (400A/600V/3 phase/ 60 Hz) Maintenance/Tool Container Length 10 ft./3 m Width 8 ft./2.44 m Height 8 ft./2.44 m Weight 10,000 lbs/4,545 kg Conveyors 1. Length 25 ft./7.62 m Width 2 ft./o.61 m(belt) Weight 1,500 lbs/682 kg 2. Length 45 ft./13.72 m Width 2 ft./0.61 m (belt) Weight 3,400 lbs/1,545 kg
